Vetusware.org
Software of the good old days

Home » Vetusware Updates » DOS » Vetusware.com updates: 2024-04-06 (DOS)
Vetusware.com updates: 2024-04-06 [message #5652] Sat, 06 April 2024 03:00
vetus@vetusware.com is currently offline  vetus@vetusware.com
Messages: 3969
Registered: September 2015
Karma: 11
Senior Member
NC Gopher 2.6
https://vetusware.com/download/NC%20Gopher%202.6/?id=18230
NCGopher v2.6 - tfurrows@sdf.org - Public domain ============================================================= NCGopher is a simple gopher client for DOS, made for the sole purpose of having a client with decent speed that runs on an 8088. It is modeled after the VF-1 gopher client to a degree. It depends heavily on mTCP's netcat utility, hence the NC name. Here is what you need to use NCGopher: * 8088 or 80x86 based machine with 640kb of RAM (less?) * DOS (only tested on 6.22, but older versions should work) * Ethernet card, installed and configured * Working and running packet driver for ethernet * mTCP from Michael Brutman, https://www.brutman.com/mTCP/ * mTCP configuration to match your network, nc.exe working. This latest version has an option in the CFG file for a QUIET mode, to support the bundled NCQ utility (a custom compiled version of mTCP's NC utility, with a -quiet argument.) You can still use this with the normal Netcat (NC) from mTCP by setting "QUIET=0" in the configuration. See the included .TXT files for details.
Previous Topic: Vetusware.com updates: 2024-04-02
Next Topic: Vetusware.com updates: 2024-04-08
Goto Forum:
  


Current Time: Thu Oct 10 21:05:41 MSK 2024

Total time taken to generate the page: 0.06549 seconds